Racing Tools

High-quality tools ™ O.S. precision engineering

For engine tools that stand the test of time, turn to the company with 75 years of engine experience. Engineered for user comfort, O.S. Speed tools offer you the best in superior strength and long, trouble-free use.

Plug Wrench

• Machined from tool steel for strength and laser-etched for looks.
  
  
• Diamond-pattern top and T-handle for a better grip and maximum torsion.
  
  
• Locking mechanism in the tip holds plug for fast, easy installation or removal.

Stock Number: OSMR2977

Flywheel Key/Centax Gauge

• A 2-in-1 tool for fast clutch clearance measurements ™ and easier flywheel work!
  
  
• Head “locks” 2-4-pin flywheels in place for easy removal/installation of flywheel nut.
  
  
• Handle offers an easy way to measure/set clutch clearances on .12-.30 engines. Just push the clutch nut through the center hole and slide sideways until   resistance is felt.
  
  
• CNC-machined, anodized aluminum construction.

Stock Number: OSMR4001

Clutch Wrench/Centax Spring Adjustment Tool

• Features a 10 mm wrench for flywheel nuts on one end ™ a tool for adjusting Centax clutch springs on .12-.30 engines on the other.
  
  
• Included T-handle for easier gripping and extra torque.
  
  
• Works with all Centax clutch systems.
  
  
• Durable steel construction.

Stock Number: OSMR4000

Flywheel Puller

• Removes flywheels with steady, even pressure ™ and without marring the crankcase!
  
  
• Features CNC-machined, hard-anodized aluminum jaws and a plated steel shaft with T-handle.
  
  
• Works with flywheels on .12-.30 on-/off-road engines.

Stock Number: OSMR4002

Driver Tool Set

• 10-piece set handles virtually all maintenance and tune-up tool needs.
  
  
• Includes a flat blade screwdriver, 2 ball and 3 nut drivers and 4 hex wrenches.
  
  
• Ultralight, anodized duralumin handles feature a diamond pattern for easier grips and flat sides to prevent rolling.
  
  
• All handles are laser-etched with tool size.
  
  
• Rings on handle offer further identification.
  
  
  • A single wide ring indicates a screwdriver or nut driver.
    
    
  • Ball and hex drivers indicate tool size with a combination of wide rings (for 1.0 mm) and narrow rings (for 0.5 mm).
    
    
• Handle caps feature rubber O-rings for easy rotation.
  
  
• Setscrews in handles allow tips to be fully retracted, set at a specific length ™ or replaced.
  
  
• All tips feature CNC-machined, spring steel tips for outstanding durability and function.
  
  
• Heat-treated, anodized replacement tips available.
  
  
• All tools also available separately.

Note: first number indicates tip size; second number indicates tip length.

Stock Number: OSMR3000

Set includes:
OSMR3005   Speed Hex Wrench Driver 1.5 mm/120 mm
OSMR3006   Speed Hex Wrench Driver 2.0 mm/120 mm
OSMR3007   Speed Hex Wrench Driver 2.5 mm/120 mm
OSMR3008   Speed Hex Wrench Driver 3.0 mm/120 mm
OSMR3015   Speed Hex Wrench Ball Driver 2.0 mm/120
OSMR3016   Speed Hex Wrench Ball Driver 2.5 mm/120
OSMR3025   Speed Flat Blade Screwdriver 2.5 mm/150 mm
OSMR3035   Speed Nut Driver 5.5 mm/100 mm
OSMR3036   Speed Nut Driver 6.0 mm/100 mm
OSMR3037   Speed Nut Driver 7.0 mm/120 mm